Keithley 7001 903 01A free download

File name 7001_903_01A.pdf

Model 7001 Switch System Quick Reference Guide A GREATER MEASURE OF CONFIDENCE Model 7001 Switch System Quick Reference Guide 1992, Keithley Instruments, Inc. All rights reserved. Cleveland, Ohio, U.S.A. Document Number: 7001-903-01 Rev. A Table of Contents Safety Precautions ... 1 Introduction ... 5 Operation Summary ... 6 Menu Structures ...11 Default Conditions ... 16 Error and Status Messages ... 19 IEEE-488.2 Common Commands and Queries... 25 SCPI Command Subsystems ... 27 Safety Precautions The following safety precautions should be observed before using this product and any associated instrumentation. Al- though some instruments and accessories would normally be used with non-hazardous voltages, there are situations where hazardous conditions may be present. This product is intended for use by qualified personnel who recognize shock hazards and are familiar with the safety pre- cautions required to avoid possible injury. Read the operat- ing information carefully before using the product. The types of product users are: Responsible body is the individual or group responsible for the use and maintenance of equipment, for ensuring that the equipment is operated within its specifications and operating limits, and for ensuring that operators are adequately trained. Operators use the product for its intended function. They must be trained in electrical safety procedures and proper use of the instrument. They must be protected from electric shock and contact with hazardous live circuits. Maintenance personnel perform routine procedures on the product to keep it operating, for example, setting the line voltage or replacing consumable materials. Maintenance procedures are described in the manual. The procedures ex- plicitly state if the operator may perform them. Otherwise, they should be performed only by service personnel. Service personnel are trained to work on live circuits, and perform safe installations and repairs of products. Only properly trained service personnel may perform installation and service procedures. Keithley products are designed for use with electrical signals that are rated Installation Category I and Installation Catego- ry II, as described in the International Electrotechnical Com- mission (IEC) Standard IEC 60664. Most measurement, control, and data I/O signals are Installation Category I and must not be directly connected to mains voltage or to voltage sources with high transient over-voltages. Installation Cate- gory II connections require protection for high transient 1 over-voltages